DSP-10 Vehicle Detector (DIABLO CONTROLS)

The DSP-10 is intended to be an ‘all-in-one’ vehicle detector designed for the parking, drive-through, and access control industries. The DSP-10 was designed for systems that need reliable vehicle detection. This detector is designed to operate utilizing a single inductive loop typical in these industries. the small packaging comes without sacrificing performance. Designed to retrofit into existing locations that may require a detector upgrade. Sophisticated noise filtering algorithms offer stable operation in noisy or troublesome installations. Features Plug and play Works on any in-ground inductive loop from 20 to 2000 microhenries Can be easily changed to fail safe or fail secure mode in the field. Advanced filtering technology for superior noise tolerance. The DSP-10-LV is protected from damage if plugged into a higher voltage. No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works. Separate Power/Fail and Detect LEDs. Compact size with industry standard 11-pin connector in a small plastic case With its compact size, front panel switch features, and built-in fail-safe or fail-secure operation for the A output, the DSP-10 is the only vehicle detector you will ever need. The DSP-10 provides many advanced features to provide a great value for your money. Extended Presence provides vehicle detection times of many hours for those unique installations. Delay for those situations where vehicles may be detected by the loop that will not be stopping at the gate/door. Extension for those times when you just need a little more time for the vehicle to travel through the gate/door area. Loop Fail output provides a way to detect and annunciate a loop failure. Sensitivity Boost for those installations that require reliable detection of semi-truck trailers and high bed vehicles. Pulse on Entry or Pulse on Exit for those operators that require this type of signal. Product information provided by diablocontrols.com DSP-1